Radium Engineering 6 Gallon Quick Fill Dump Can Standard Filler 20-0697-00

OVERVIEW
Dump cans are used in motorsports when quick refueling pit stops are essential. The main difference between a "dump can" and a common "fuel jug" is the vent architecture. For quick filling, air entering the can must replace the exiting fuel at the same rate. If not, a vacuum will create a flow restriction and produce a "gurgle" or "chug" effect. These Radium Engineering 6 gallon dump cans are designed with a large 1.675" OD vent tube that comes from the bottom minimizing refueling leaks and maximizing air flow for quick-filling. The vent tube can also be used for re-filling the dump can.

The dump cans are molded from a durable polymer safe for all fuel types (leaded gas, unleaded gas, diesel, AV gas, methanol, ethanol, E15, E85, etc.). The external rectangular shape was designed to match the fuel jug industry standard (9.5" x 9.5"). This allows for easy securing and storing with other fuel jugs. The integrated vent handle has finger grips for comfort. Other ergonomic features are molded into the dump can to make handling easier. The accurate graduation marks are molded in "US GALLONS" on one side, and "LITERS" on the opposite side.

SPECIFICATIONS
Volume: 6 Gallons (22 Liters)
Height: 25.25" (641mm)
Width: 9.5" (241mm)
Depth: 9.5" (241mm) 
Vent OD: 1.675" (43mm)
Vent ID: 1.375" (35mm) 
Pour Spout OD (if cut): 2.5" or 3"
Color: Semitransparent White

20-0697-00 QUICK FILL DUMP CAN, 6 GALLON, STANDARD FILLER
This dump can assembly has all the features mentioned above and is configured for "standard filling" (non-dry break). This is ideal for all types of motorsports.

This dump can features knurled aluminum pour and vent caps. The inner flow diameter of the stainless steel spout is maximized yet still compatible with all OEM fuel fillers. 

For ergonomics, the anodized aluminum plug also features knurled machining.

The vent cap features 6 different fuel type indicators: (UNLEADED, LEADED, METHANOL, ETHANOL, PRE-MIXED, DIESEL). The small knob can be screwed into the appropriate threaded hole to mark the fuel type inside.

For slow controlled filling, the plastic flip cap can be simply unlatched. For quick filling, the entire vent cap can be unscrewed.