All production is done in house so a high standard of quality is assured.TODA sports injection KIT improves engine response and power output, through the use of one throttle body per cylinder. Effective tuning per cylinder not compromised tuning with only one throttle body. Fine tuning of the injection system brings most of benefit in the lower to mid ranges of the power band especially & the top ranges as well.
Compared to an individual throttle : you also gain a smoother idling, when even you have to use large cams (management ECU is required).
Super response ----The improvement of the accelerator response is due to a reduction in volume of air within the manifold.
Increased power --------------------------------Each intake is the same length.
(Improvement in aspiration efficiency) Free flowing intake ports.
Individual throttle bodies are individually smaller in volume but collectively larger
in volume.
Airflow bench tested trumpet.
Bottom & mid range torque increase----Reduces cylinder to cylinder breathing interference. This is due to the independent
throttle bodies and more effective injector positioning.
An individual throttle for each cylinder. Gives super response, and improvements through out the rev range to both power and torque.
*The standard trumpet length is 63mm.
*Delivery pipe designed to be used with standard B16A injector nozzle size. |
| B16A/B16B/B18C-R Sports Injection KIT (Throttle valve size: Ų45mm) | Engine Type | B16A/B16B/B18C-R | | Part No. | 17100-B16-453 | 17100-B16-456 | 17100-B16-458 | | Price | „260,000 | „260,000 | „260,000 | | Throttle valve size | Ų45mm | | Trumpet | 33mm | 63mm | 88mm | | *Injectors not included. |
|
|
| B16A/B16B/B18C-R Sports Injection KIT (Throttle valve size: Ų50mm) | Engine Type | B16A/B16B/B18C-R | | Part No. | 17100-B16-503 | 17100-B16-506 | 17100-B16-508 | | Price | „270,000 | „270,000 | „270,000 | | Throttle valve size | Ų50mm | | Trumpet | 33mm | 63mm | 88mm | | *Injectors not included. |
|
|
|
Take a look at the chart above, first decide if you want a 45mm or 50mm throttle blade in each throttle body. Then determine how long you want the "trumpet" to be. Standard length is 63mm but there is also a shorter and a longer length available if you have clearance issues in whichever chassis you are using.
This is a special order part from japan so plan on a minimum 2 week lead time before this item ships. Please contact us for the most accurate shipping eta.
