Radium Engineering Fuel Surge Tank Install Kit for Evolution EVO X 4B11T

SKU
20-0113
$351.45
Available

Not in stock at our Sanford, FL location but electronically verified in stock at the Manufacturer/Distributor within the last 12 hours. (aka: not experiencing a supply delay)

Description


This comprehensive installation kit includes everything needed to install a Radium fuel surge tank with a single 39mm fuel pump or a Bosch 044 fuel pump in a Mitsubishi Lancer Evolution X. The kit was not designed to work with the Radium MPFST.
 

All Radium FSTs are CNC machined from aluminum. They are fully anodized and use PTFE insulated wiring, submersible hose, etc. to make them alcohol (ethanol/methanol/E85) compliant. The Mitsubishi Evolution X install kit locates the FST in a collision-safe area, centered behind the rear seat but in front of the plastic paneling in the trunk

This allows 100% of useable trunk space as the panel goes back on after the install. The powder coated aluminum bracket secures to OEM mounting bosses so no drilling or cutting is necessary. Furthermore, the OEM battery and windshield washer fluid bottle are retained and do not need to be relocated.

Also included are wiring components with flying leads featuring Raychem solderless butt splices, and a weatherproof fuse and relay to drive the FST's fuel pump. Wiring is very simple and takes less than 30 minutes to assemble. No soldering is required. 

Included are 4 PTFE hoses which are cut to length and preassembled. PTFE hose is perfect for all types of fuel, especially with high alcohol contents, such as ethanol (E85). Unlike standard rubber hose, PTFE is non-permeable and eliminates any possible fuel vapor smell in the vehicle. Radium PTFE hoses use anodized aluminum hose ends and are cut-to-length specifically for this application. The inner stainless steel braid resists extreme fuel pressures and is covered with black PVC which gives the hose added protection from debris and provides abrasion protection. Supplied in -6AN size only.
The suppled -6AN hoses intergrate with the stock fuel lines, they do not completely replace all stock fuel lines.

EVO X Install Kit Features:

-Preassembled 3/8" (-6AN) PTFE Hoses 
-Powder Coated Mounting Bracket
-AN and OEM Style Adapter Fittings
-Stainless Steel Hardware 
-Wiring Components with Relay and Fuse
-Installation Instructions 


WHY DO I NEED A FUEL SURGE TANK?

Shown below is an 18 minute track session of vehicle without a fuel surge tank installed. A fuel surge tank is excellent protections agains fuel starvation which can damage an engine.

 

X Axis: Fuel Pressure above 1500RPM Note: Pressure SHOULD be ~47.5psi constant 

NOTES: 
If a Radium Engineering dual internal pump FST is required, this can be achieved. However, the plumbing and electrical in this kit was designed for 1 pump. Simply choose a FST with dual pumps HERE to use with this EVO install kit. Also pickup a DIY harness HERE as well for the electrical required to drive the second FST pump. Lastly, you will need to plumb a second hose from the FST to the fuel rail. These PTFE hoses HERE can be helpful. 

If a Radium FST-R is required, this can be achieved. However, the plumbing in this kit was designed to reuse the OEM Mitsubishi FPR. One of the hoses in this kit will not be used and the OEM 1/4" rubber FPR return hose will need to be either removed, drained, or plugged. Furthermore, the FPR vacuum hose will need to be extended to the trunk.
Neither of the two scenarios above are covered in depth in the instruction manual. Contact us for more details.

Lastly, due to the restrictive return port on the OEM fuel pump housing, a slightly higher static fuel pressure is normal when using a high flow pump. To alleviate this issue, the OEM fuel pump housing return port can be modified (enlarged) to alleviate the restriction and promote fuel flow back into the OEM fuel tank. This is noted in the instruction manual.

Specifications

More Information
Availability New In Stock / Available
Barcode Radium 20-0113
Shipping Weight (Dimensional) 8.000000
Clearance Sale No
Availability Available
Part Type Surge Tank Installation Kits
Make Mitsubishi
Model Evo X CZ4A
Engine 4B11T Evo X
Color Black
Fuel Pump Type Surge Tank
e85 Compatible Yes
Brand Radium Engineering
Carb Legal Unspecified
Shipping Label Free Shipping

Reviews

Write Your Own Review
You're reviewing:Radium Engineering Fuel Surge Tank Install Kit for Evolution EVO X 4B11T

Related Items List (3)

Not sure about a purchase?

Contact us at any of our channels and get inmediate help before making decisions.

Copyright© 2022 realstreetperformance.com | All Rights Reserved