Haltech Platinum PRO Plug-in - ECU EMS Hyundai BK Theta Genesis Kit 09-12

Supported Models: 
Hyundai Genesis Coupe (BK) - USA Delivered Model Only 
Engine Codes: Theta (2.0T) Only, Manual Transmission Only 

Features: 
• Direct plug and play replacement of the OEM ECU, No re-wiring necessary 
• Uses the vehicles standard sensors & engine hardware 
• Electronic Throttle Control - (Drive By Wire) with Cruise Control 
• Retains instrument panel functionality via CAN communications 
• Windows 2000, XP, Vista, Windows 7 compatible software 
• Real time programming, instant hesitation free adjustment while engine is running 
• Fully user definable 32 x 32 mapping with over 30 correction tables available 
• Tuning via Volumetric Efficiency (VE) or Injection time 
• OBDII Diagnostic Trouble Code Storing & Check Engine Light Control – Generic OBDII protocol Only 
• Wideband “auto tuning” using user definable target AFR table 
• USB and CAN Communication Port 

Factory Outputs: 
• 4 x Fuel Injector outputs (Peak & Hold) 
• 4 x Ignition outputs (15A Internal) 
• Electronic Throttle Control (DBW) 
• AC Clutch Relay 
• Check Engine Light 
• Fuel Pump 
• Thermo Fan Outputs Cruise Control 
• Factory Inputs: MAP sensors Throttle Position Sensor Knock Detection Sensor 
• Narrow Band Oxygen sensor 
• Coolant Temperature sensor 
• Vehicle Speed Sensor 
• Air Temperature sensor Power Steering Switch Oil Temperature Sensor 
• Brake Switch Clutch Switch 
• Expansion I/O: 4 x Analogue Voltage Inputs, 1 x Digital Input, 4 x Digital Outputs 
• Configurable for: Aux Rev Limiter Exhaust Gas Temperature Sensors Air Temperature Switch 
• Flat Shift Fuel Temperature Sensors 
• Aux Fuel Pump 
• NOS Enable Oil Temperature Sensors 
• Boost Control 
• Fuel Pressure Sensor 
• Diff Temperature Sensor 
• Battery Light 
• External Map Sensor (Up to 5 Bar) 
• Gearbox Temperature Sensor 
• Generic Duty Output 
• Oil Pressure Sensor 
• Generic Temperature Sensors 
• Nitrous Activation Switch 
• Wideband O2 Sensors 
• Discrete ON/OFF Switches 
• Flex Fuel Sensor 
Plus much more … 

Expansions I/O: 
Up to 36 more I/O channels are available using the optional Haltech I/O 12 and TCA 2/4 CAN Devices - 

Functions: 
• Closed Loop O2 Control 
• Knock Control 
• Long Term Fuel Trim 
• Rev Limiter 
• Closed/Open Loop Boost Control 
• Gear Setup 
• Nitrous Activation Output 
• Over Boost protection 
• Fuel Composition (E85/Flex Fuel) 
• Speed Limiter 
• Antilag Launch 
• Decel Cut 

Correction Tables: 
• Fuel Ignition Boost 
• Air Temperature Correction 
• Air Temp Duty Correction 
• Coolant Temperature Correction 
• Map Correction 
• Zero Throttle Gear Correction 
• Cylinder Trim TPS Correction 
• Generic Correction 
• Gear Correction 

Miscellaneous: Data Logging: 
• 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data 
• Max 20 channels logging capability 
• Tune can be password protected in software 
• Rugged anodized aluminum casing 

Factory Functions: 
• Not Supported: Immobilizer Traction Control 

Power Requirements: 
• Source: 8.6 to 16.5 Volts DC 
• Consumption: 530mA @ 12Volts DC 

Operating Temperature Range: 
-40Deg C to 85 Deg C ( -40 Deg F to 185 Deg F) 

Physical Specifications: 
Length: 179mm, Width: 158mm, Height: 42mm, Weight: 730g (1.6 lb) 

The kit includes: 
Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.