AEM Series 2 P&P EMS 89-94 Nissan SR20 240SX Sentra Pulsar

SKU
30-6600
$706.44
Discontinued

The manufacturer has stopped production of this item. We have none left, and cannot get more. But we can help you find a comparable alternative that is available.

Disabled

Description

This is a standalone ECU for Nissan applications listed inside. This ecu completely replaces the factory ecu and controls every aspect of the engine. We use it on almost every project we do because it performs excellently at a reasonable price. 


Series 2 Plug & Play Engine Management System

AEM's Series 2 EMS is a complete engine control system that plugs into the factory harness and uses the factory sensors. This means you do not need to replace any parts of the harness or sensors, just plug the EMS into the harness and begin tuning! The Series 2 EMS allows you to control every aspect of your 2.0L SR20DE. From rev limit, timing, adding different sized injectors, boost control, nitrous injection, even anti-lag and individual cylinder fuel and timing trims, the Series 2 EMS gives you total control from an easy to use interface.

*50mm AEM Trigger Disc included. Some applications may require a 54mm Trigger Disc AEM Part#30-8762

Outputs
Injector Outputs4 Peak & Hold, 8Saturated
Coil Outputs4
Selectable direct drive or 0-5V Coil OutputYes
Direct plug in, no jumper harness requiredYes
General purpose LS outputs12
General purpose HS outputs4
Individual cylinder ignition trimsYes
Individual cylinder fuel trimsYes
Inputs
Trigger inputs (Ref/Sync)4
Analog voltage inputs18
Configurable Analog/RTD/Thermister inputs4
Switch inputs5
Lambda inputs2x
Knock sensors2
User adjustable knock sensor center frequencyYes
Communication
USB commsYes
RS232 commsYes
Communication cables includedYes
Fully enabled editing/logging software includedYes
CAN bus equippedYes
RS232 datastream output19 ch
CAN datastream output19 ch
Communicates with AIM Dash/DataloggersYes
Communicates with Racepak Dash/DataloggersYes
DATA Acquisition
Internal data logging1 MB
Maximum internal logging rate (per channel)250 Hz
PC loggingYes
Data analysis using AEMLogYes
Functions and Features
All channels/maps/tuning options unlockedYes
Boost controlYes
Groundspeed based boost targetYes
Staged injectionYes
Ground speed limitingYes
Rate of Acceleration ControlYes
Overrun boost enhancement (anti-lag)Yes
Gear change ignition cut (shift-without-lift)Yes
Password protected calibrationsYes
Fuel & Ignition rev limitersYes
"In cockpit" global fuel trim capabilityYes
Gear dependent shift lightYes
Evap/Purge functionYes
DC Motor control2 Ch
Software definable "virtual" switch inputs2
EGT Based fuel trimsYes
Maximum boost limitNone
Physical Dimensions
Length192 mm
With150 mm
Height37 mm
FinishBlack Anodized


AEM Series 2 Plug-N-Play Engine Management Systems
- Legal in California only for racing vehicles which may never be used upon a highway.

This product fits the following vehicles:
  • 1991 to 1993 Infiniti G20 2.0L 4 Cyl
  • 1991 to 1994 Nissan 240SX 2.4L 4 Cyl
  • 1993 to 1994 Nissan Altima 2.4L 4 Cyl
  • 1991 to 1993 Nissan NX1600 1.6L 4 Cyl
  • 1991 to 1993 Nissan NX2000 2.0L 4 Cyl
  • 1990 to 1994 Nissan Pulsar Gti-R 2.0L Turbo
  • 1991 to 1994 Nissan Sentra 1.6L 4 Cyl
  • Specifications

    More Information
    Barcode 840879021306
    Note Fits only 240SX S13 & 93-94 Altima U13 KA24DE, Sentra B13 GA16DE, Pulsar Gti-R N14 SR20DET
    Shipping Weight (Dimensional) 3.150000
    Clearance Sale No
    Availability Discontinued
    Part Type PNP Engine Management Systems
    Make Nissan / Infiniti
    Model 240SX 89-94 S13, Sentra 91-94 B13, Pulsar GTI-R 90-94 N14, Altima 93-97 U13
    Engine GA16DE, KA24DE, SR20DE, SR20DET
    Brand AEM Electronics
    Carb Legal No

    Reviews

    Write Your Own Review
    You're reviewing:AEM Series 2 P&P EMS 89-94 Nissan SR20 240SX Sentra Pulsar

    Related Items List (3)

    Not sure about a purchase?

    Contact us at any of our channels and get inmediate help before making decisions.

    Copyright© 2022 realstreetperformance.com | All Rights Reserved